INTERIOR IR CAMERA
INTERIOR infrared dashcam for Taxi ⋅ Uber ⋅ Lyft
Interior IR camera for X10-2CH, X9-2CH, X5-2CH.
INTERIOR IR CAMERA
INTERIOR infrared dashcam
for Taxi ⋅ Uber ⋅ Lyft
Interior IR camera for X10-2CH, X9-2CH, X5-2CH.
FEATURES
Built for interior recording even in extreme poor-lit situations.
Typical auto dash cams are normally built for recording only outside of the vehicle.
But as the number of ride-sharing users increases, the safety concern of inside cabin has become more critical.
The IROAD IR cameras with built-in infrared LEDs allow our users to safely record not only the outside of the vehicle, but also the inside even if the in-cabin area has low light conditions.
Owning an IR dashcam is becoming more necessary for taxi drivers as well. They need to be prepared to record potential incidents inside the vehicle and anything around the vehicle all the time. They may not need it but when they do, an IR dashcam will be a lifesaving tool.
Compatiable with
IROAD X10 for IR Cam
IROAD X9 for IR Cam
IROAD X5 for IR Cam

SPECIFICATIONS
PRODUCT NAME
INTERIOR IR FHD CAMERA
PRODUCT DIMENSIONS
80 x 26mm / 32g
RESOLUTION
Full HD(1920x1080)
IR Illumination
850nm infrared lights
FRAME RATE
30 fps
VIEWING ANGLE
140°
CABLE LENGTH
BASIC : 1M

OPTIONAL : 7M, 20M

OPERATING TEMPERATURE
-20°~ 60°C 
WARRANTY
1year
KC CERTFICATION
R-R-JWW-IROAD-IR-FHD
Note

MOBILE

X10 MULTI COVER
Security Accessory for IROAD X10 Dash Cam
Neat Cable Management
Prevent Damage and Access to SD card
Prevent Unplugging the Cables
FEATURE
Neat Cable l Secure All Cables
The IROAD multi cover helps to keep cables neat. Also, It prevents damage and physical access to the cables of dash cam.
It is a great method to protect your dash cam and your vehicle.
Prevent Memory Card Corruption
The IROAD multi cover is a security accessory to protect Micro SD card slot from physical access, so that video files cannot be damaged or deleted.
HOW TO INSTALL MULTI COVER
IROAD X10 MULTI COVER INSTALLATION
– Place the multi-cover top plate to the X10.
– Connect each cable to the X10 and organize the cables in each hole of the cover.
– Cables should be organized in order from the left.
– After fastening the bottom part of multi-cover to top plate, tighten the screw.
– Tighten the SD cover with screw.

1. Adjust multi-cover and front camera of X10 and push it until it clicks into place.

2. Remove double-sided tape film of the multi-cover and attach it to the selected location.

3. Place the top cover and organized the cables.

– Place the cables from left to right relative to the holes in the top cover.

4. After connecting the GPS cable to the X10, place the cable to the first hole from the left.

– Place the GPS cable molding towards left to connect easily.

5. After connecting the OBDII scanner cable (optional) to the X10, place the cable to the second hole position.

– Place the OBDII scanner cable molding towards right to connect easily.

6. After connecting the Rear cable to the X10, place the cable to the third hole position.

7. After connecting the power cable to the X10, place the cable to the first hole from the right.

– Place the power cable molding towards right to connect easily.

8. After connecting the cables, place the bottom cover case with the top cover together and push it to the bottom to tighten.

9. Tighten the screws with an allen wrench. After assembling the top, bottom cover, place the SD card cover and tighten the screws.

PACKAGE CONTENTS
Top Cover
(3M Tape)

Bottom
Cover

SD Card Slot
Cover

Allen
Wrench

Screws

Spare 3M Tape

※ Be careful when installing the screws as it may be lost